Table of Contents
Advertisement
Method:
The Method will select the IP addressing mode the RDX 8000 will use. The two options are DHCP or Manual. The RDX
8000 default configuration is DHCP.
• DHCP – the RDX 8000 will seek out the DHCP-sever on your network and automatically obtain an IP address from
the server each time it powers up.
• Manual – The RDX 8000 will use the IP address and other network parameters set on this page for network
communication.
IP Address:
Manually assigned IP address that the RDX 8000 will use for network communication.
Netmask:
Netmask used for network communication.
Gateway:
IP Address of gateway in network.
DNS 1:
A DNS server allows the RDX 8000 to communicate with other network clients via their host name. Enter the IP Address
of preferred DNS server.
DNS 2:
IP Address of secondary DNS server.
To save the changes made on this page click the "Submit" button.
Figure 27 — RDX 8000 Configure Host Name
RDX 8000 User Guide
48
Advertisement
Table of Contents
