Table of Contents
Advertisement
Class I Laser Product
Rack Safety
Quantum LTO-5 HH SAS Model C User's Guide
The product may contain a laser assembly that complies with the
performance standards set by the U.S. Food and Drug Administration
for a Class I laser product. Class I laser products do not emit hazardous
laser radiation. The product has the necessary protective housing and
scanning safeguards to ensure that laser radiation is inaccessible during
operation or is within Class I limits. External safety agencies have
reviewed the product and have obtained approvals to the latest
standards as they apply.
The following general safety information should be used for all rack
mounted devices.
DANGER
• Always lower the leveling pads on the rack cabinet.
• Always install stabilizer brackets on the rack cabinet.
• To avoid hazardous conditions due to uneven mechanical loading,
always install the heaviest devices in the bottom of the rack cabinet.
Always install servers and optional devices starting from the bottom
of the rack cabinet.
• Rack mounted devices are not to be used as a shelf or work space.
Do not place any object on top of rack mounted devices.
• Each rack cabinet might have more than one power cord. Be sure to
disconnect all power cords in the rack cabinet before servicing any
device in the rack cabinet.
• Connect all devices installed in a rack cabinet to power devices
installed in the same rack cabinet. Do not plug a power cord from a
device installed in one rack cabinet into a power device installed in a
different rack cabinet.
Chapter 1: Preface
Class I Laser Product
5
Advertisement
Table of Contents
