Table of Contents
Advertisement
NTP
The NTP tab allows the administrator to set a path to a Network Time Server (if an NTP server is configured on their
particular network). The RDX 8000 will synchronize with the NTP time server every eight hours.
To use the NTP time synchronization, select Enable and enter the name or IP address of the desired time server. Click
the Submit button for the settings to take effect. The first time synchronization will take place when "Submit" is clicked.
If there is an issue, an error message will be displayed.
Figure 36 — RDX 8000 Configure NTP
57
RDX 8000 User Guide
Advertisement
Table of Contents
