Hirschmann RS20 User Manual page 23

Industrial ethernet (gigabit-)switch with software l2e, l2p, l3e or l3p
Hide thumbs Also See for RS20:
Table of Contents

Advertisement

EtherNet/IP
Switch Max
ID 04
Ports
Multicast Set-
ID 05
tings (IGMP
Snooping)
Bit 0 RW
Bit 1 RW
Bit 2 RO
Bit 4-6 RW
Bit 8-10 RW
Switch Existing
ID 06
Ports
Per Bit starting
with Bit 0
(=Port 1)
Switch Port
ID 07
Control
Per Bit starting
with Bit 0
(=Port 1)
Switch Ports
ID 08
Mapping
Starting with
Index 0 (=Port
1)
Switch Action
ID 0x9
Status
Bit 0
Bit 1
Table 7: Hirschmann Ethernet Switch Agent Object
a. RS20/RS30/RS40, MS20/MS30, OCTOPUS, Power MICE and MACH 1000: 32 bit
MACH 4000: 64 Bit
The Hirschmann-specific Ethernet Switch Agent Object provides you with the
additional manufacturer-specific service with service code 0x35 for saving
the Switch configuration. The Switch responds to the request to save the con-
figuration as soon as it has saved the configuration in the flash memory.
Industrial Protocols
Release 5.0 04/09
UINT (16 bit) RO Maximum number of Ethernet Switch Ports
WORD (16bit) RW
IGMP Snooping (1=enabled, 0=disabled)
IGMP Querier (1=enabled, 0=disabled)
IGMP Querier Mode (1=Querier, 0=Non-Querier)
IGMP Querier Packet Version V1 = 1 V2 = 2 V3 = 3 Off = 0
(IGMP Querier disabled)
Treatment of Unknown Multicasts (Railswitch only): 0 = Send
To All Ports 1 = Send To Query Ports 2 = Discard
a
ARRAY OF DWORD
1=Port exists, 0=Port not available. Array (bit mask) size is ad-
justed to the size of maximum number of Switch ports (e.g.
max. 28 Ports => 1 DWORD is used (32bit)).
1
ARRAY OF DWORD
Ports
0=Port enabled, 1=Port disabled. Array (bit mask) size is ad-
justed to the size of maximum number of Switch ports
(e.g. max. 28 Ports => 1 DWORD is used (32bit)).
ARRAY OF USINT (BYTE, 8 bit) RO Instance number of the
Ethernet Link Object
All Ethernet Link Object Instances for the existing Ethernet
Switch Ports (1..N, maximum number of ports). When the entry
is 0, the Ethernet Link Object for this port does not exist.
DWORD (32 bit) RO
Flash write in progress
Flash write failed
2.2 EtherNet/IP Parameters
RO Bitmask of existing Switch Ports
RW Bitmask Link Admin Status Switch
23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents