Hirschmann RS20 User Manual page 19

EtherNet/IP
Id Attribute
1 Status
2 Interface Capa-
bility flags
3 Config Control Set/Get
4 Physical Link
Object
5 Interface Con-
figuration
6 Host name
Table 4: TCP/IP Interface Objekt
Industrial Protocols
Release 5.0 04/09
Access Data type
rule
Get DWORD
Get DWORD
DWORD
Get Structure: UINT
Path size
EPATH Path
Set/Get Structure:
UDINT IP ad-
dress
UDINT Net-
mask
UDINT Gate-
way address
UDINT Name
server 1
UDINT Name
server 2
STRING Do-
main name
Set/Get STRING
2.2 EtherNet/IP Parameters
Description
Interface Status (0 = Interface not configured,
1 = Interface contains valid config).
Bit 0 = BOOTP Client,
Bit 1 = DNS Client,
Bit 2 = DHCP Client,
Bit 3 = DHCP-DNS Update,
Bit 4 = Configuration setable (within CIP).
Other bits reserved (0).
Bit 0-3:
Value 0 = using stored config,
Value 1 = using BOOTP,
Value 2 = using DHCP.
Bit 4 = 1 device uses DNS for name lookup
(always 0 because not supported)
Other bits reserved (0).
Path to the Physical Link Objekt, always
{20hex, F6hex, 24hex, 01hex} describing
instance 1 of the Ethernet Link Object.
IP Stack Configuration (IP-Address, Netmask,
Gateway, 2 Nameserver (DNS, not support-
ed) and the domain name).
Host name (for DHCP DNS Update).
19