Hirschmann RS20 User Manual page 48

PROFINET IO
Byte Content
0 Report port error
1 Report connection er-
ror
2 Transmission rate too
high
3 Port on
4 Link status
5 Bit rate
6 Duplex
7 Autonegotiation
Table 14: Port status/parameters
48
Ac- Value Meaning
cess
rw 0 Do not send alarms
1 Send alarm if one of the following alarm rea-
sons occurs.
rw 0 Do not send alarm
1 Send alarm if the connection has failed.
rw 0 Do not send alarm
1 Send alarm if the threshold value for the
temperature has been exceeded.
rw 0 Unavailable
1 Switched on
2 Switched off
ro 0 Unavailable
1 Connection exists
2 Connection interrupted
ro 0 Unavailable
1 Unknown
2 10 MBit/s
2 100 MBit/s
2 1000 MBit/s
ro 0 Unavailable
1 Half duplex
2 Full duplex
ro 0 Unavailable
1 Off
2 On
3.2 PROFINET IO Parameters
Industrial Protocols
Release 5.0 04/09