Integration In Control System; Preparing The Switch - Hirschmann RS20 User Manual

PROFINET IO

3.1 Integration in Control System

3.1.1 Preparing the Switch

After installing and connecting the Switch, you configure it according to the
"Basic Configuration" user manual:
Use the Web-based interface in the Basic Settings:Network dialog
to check whether Local is selected in the "Mode" frame.
Use the Web-based interface in the Switching:VLAN:Global dialog
to check whether "VLAN 0 Transparent Mode" is selected.
Use the Web-based interface in the Advanced:Industry Protocols
dialog to check whether Profinet IO is activated.
Load the GSD file and the icon onto your local computer.
You get the GSD file and the icon
– by using the Web-based interface in the
Advanced:Industry Protocols dialog or
– by using the software (Stand Alone GSDML File Generator) for
creating the GSD file, which is included in the delivery.
Configure the Alarm setting and the Threshold value for the alarms you
want to monitor.
30
3.1 Integration in Control System
Industrial Protocols
Release 5.0 04/09