Tcp/Ip Interface Object - Hirschmann RS20 User Manual
Industrial ethernet (gigabit-)switch
with software l2e, l2p, l3e or l3p
Hide thumbs
Also See for RS20:
- Reference manual (572 pages) ,
- User manual (294 pages) ,
- Programming manual (116 pages)
Table of Contents
Advertisement
EtherNet/IP
2.2 EtherNet/IP Parameters
2.2.2 TCP/IP Interface Object
The Switch supports an instance (instance 1) of the TCP/IP Interface Object
(class code f5hex) of EtherNet/IP.
In the case of write access, the Switch stores the complete configuration in
its flash memory. Saving can take 10 seconds. If the save process is inter-
rupted, for example, by a power cut, the Switch may crash.
Note: The Switch replies the configuration change „set request" with a
„response" before the saving of the configuration is finished.
Industrial Protocols
18
Release 5.0 04/09
Hide quick links:
Advertisement
Table of Contents
