Hirschmann RS20 User Manual page 34

PROFINET IO
Figure 12: Dialog for entering the object name (= name of the Switch) and the IP
parameter
Enter the same device name here.
Click on "Ethernet".
Enter the IP parameters.
Close the Ethernet input window.
Click on "OK" to close the properties window.
The Switch is now included in the configuration.
Adding modules for modular devices
Use Drag & Drop to pull a module from the library into a slot.
Simatic S7 adds the ports using the Module properties.
34
3.1 Integration in Control System
Industrial Protocols
Release 5.0 04/09