Siemens SIRIUS 3RW44 User Manual page 74

Commissioning
Status diagram of the outputs
Control voltage at
terminal A1/A2
Ramp process of the
soft starter
IN1 - IN4
Start command
Input 1-
input 4
Run up
Bypass
Operation
Stopping
On-time
Command
motor-on
DC Braking
Power On
Group
1)
warning
Group
1)
error
Bus error
Device error
Ready to start
Warning pending
PAA 1
PAA 2
ZustandAusgang.wmf
5-30
Start command
Error reset
Warning /
command
error
Error occurs
disappears
1) Note
Possible group warnings / group faults see Chapter 7.1.2 "Warnings and Group Errors".
Group error, bus error or device error occurs;
soft starter switches off and goes into error mode
Soft starter has detected
Automatic restart
run-up
when reset
Warning /
Warning pending
error
disappears
Error occurs
Both of these output functions
can be directly controlled via
the optional Profibus.
Soft starter has
detected run-up
Approx. 1s
delay
Error-reset command
SIRIUS 3RW44 manual
GWA 4NEB 535 2195-02 DS 06
Stop command