Siemens SIRIUS 3RW44 User Manual page 4

Safety Guidelines
This manual contains notices you have to observe in order to guarantee your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are graded
according to the degree of danger.
Danger
indicates that death or severe personal injury will result if proper precautions are not taken.
Warning
indicates that death or severe personal injury may result if proper precautions are not taken.
Caution
with a safety alert symbol, indicates that minor personal injury can result if proper precautions are not taken.
Caution
without a safety alert symbol, indicates that property damage can result if proper precautions are not taken.
Notice
indicates that an unintended result or situation can occur if the corresponding information is not taken into account.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will be
used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to property
damage.
Qualified personnel
The device/system may only be set up and used in conjunction with this documentation. Commissioning and operation
of a device/system may only be performed by qualified personnel. Within the context of the safety notes in this
documentation qualified persons are defined as persons who are authorized to commission, ground and label devices,
systems and circuits in accordance with established safety practices and standards.
Prescribed Usage
Note the following:
Warning
The device may only be used for the applications described in the catalog or the technical description and only in
connection with devices or components from other manufacturers which have been approved or recommended by
Siemens. Correct, reliable operation of the product requires proper transport, storage, positioning and assembly as
well as careful operation and maintenance.
Trademarks
All names identified by ® are registered trademarks of the Siemens AG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Copyright Siemens AG 2005. All rights reserved.
This document shall not be transmitted or reproduced, nor shall its
contents be exploited or disclosed to third persons without prior written
consent from Siemens. Infringements will be subject to damage claims.
All rights reserved, in particular in case of a patent grant of utility model
registration.
Siemens AG
Industry Sector
P.O. box 2355, 90713 Fuerth
Germany
Siemens Aktiengesellschaft
Disclaimer of liability
Although we have carefully checked the contents of this publication for
conformity with the hardware and software described, we cannot
guarantee complete conformity since errors cannot be excluded. The
information provided in this manual is checked at regular intervals and
any corrections which might become necessary will be included in the
next editions.

Siemens AG 2005
Subject to technical changes