Siemens SIRIUS 3RW44 User Manual page 132

PROFIBUS DP Communication Module
8-8
Proceed as follows:
Step
3
1
4
Insert a small screwdriver into the
opening in the cover of the 3RW44 soft
starter (1) . Lightly press the screwdriver
downwards (2) and remove the cover
(3) .
3
2
Insert the PROFIBUS DP
communication module into the device
(4) .
Screw the PROFIBUS DP
communication module into place using
the screws included in the scope of
supply (5) .
Plug the PROFIBUS connecting cable
into the socket of the communication
5
module (6) . Screw the PROFIBUS
connecting cable firmly into place.
Switch on the supply voltage.
6
The "BUS" LED blinks yellow. This
means that the communication module
has been inserted correctly, but has not
5
yet been activated.
0.8 ... 1.2 Nm
7 ... 10.3 lbf· in
Description
SIRIUS 3RW44 manual
GWA 4NEB 535 2195-02 DS 06