Icom ID-4100A Basic Manual page 59

D Setting the skip frequencies
You can set unnecessary frequencies as a Skip channel
(PSKIP) to be skipped during a scan. The Skip function
speeds up a scan.
1. Start the VFO scan.
• When a signal is received, the scan pauses.
2. Push [QUICK].
3. Rotate [DIAL] to select "SKIP."
• Sets the frequency as a Skip channel into empty Memory
channel 999.
• The entered Memory channel number blinks.
L If channel 999 already has content, the transceiver
automatically searches for another blank channel to use. If
there is no blank channel, an error beep sounds, and the
frequency is not set as a Skip channel.
4. After setting, the scan resumes.
SCAN OPERATION
TIP: Once frequencies are set as a Skip channel, these
frequencies are skipped until clearing the skip setting. To
clear the skip setting, see page 46 for details.
L The skip setting is also cleared when the Memory
channel set as a Skip channel is deleted. See the
Advanced manual for details. (Section 1)
[MENU]
[ ]
[V/M]
[DIAL]
6
6
[QUICK]
44
BASIC MANUAL