Quick Menu - Icom ID-51A Basic Instructions

VOLUME CONTROL [VOL]
@1
Rotate to adjust the audio volume level. (p. 11)
CONTROL DIAL [DIAL]
@2
Rotate to select the operating frequency. (p. 34)
➥
While in the Memory mode, rotate to select a memory
➥
channel. (p. 42)
While scanning, rotate to change the scanning direc-
➥
tion.
Hold down [SQL], and rotate to adjust the squelch level.
➥
(p. 35)
While in the DR screen, or with the Menu screen or
➥
Quick Menu screen open, rotate to select a desired op-
tion or value.
PANEL DESCRIPTION
D Quick Menu
In the Quick Menu, the selectable items differ, depending on
the operating mode or function. The items shown below are
examples.
VFO mode MR mode
Band Select Bank Select
DUP DUP
TONE TONE
TS TS
DTMF TX SKIP
Voice TX DTMF TX
GPS Information Voice TX
GPS Position GPS Information PRIO Watch
PRIO Watch GPS Position
Weather Alert PRIO Watch
Home CH Set Weather Alert
Voltage Home CH Set
Band scope Display Type
<<REC Start>> Voltage
<<BC Radio ON>> Band scope
<<BC Radio Mode>> <<REC Start>> <<GPS Logger only>> <<BC Radio Mode>>
<<GPS Logger only>> <<BC Radio ON>>
<<BC Radio Mode>>
<<GPS Logger only>>
1
CALL-CH mode DR function
DUP Group Select
TONE Repeater Detail
TS DTMF TX
DTMF TX Voice TX
Voice TX GPS Information
GPS Information GPS Position
GPS Position PRIO Watch
Weather Alert
Weather Alert Display Type
Display Type DSQL
Voltage Home CH Set
Band scope Voltage
<<REC Start>> Band scope
<<BC Radio ON>> <<REC Start>>
<<BC Radio Mode>> <<BC Radio ON>>
<<GPS Logger only>>
1
4