Icom ID-4100A Basic Manual page 45

Voice TX
Set microphone voice recording options.
Record*
Starts recording the microphone audio.
TX Set
Repeat Time
Sets the repeat interval. The transceiver repeatedly transmits the
recorded voice audio at this interval.
TX Monitor
The TX Monitor function outputs the TX voice audio from the
speaker during voice transmission.
<<TX>>*
The transceiver transmits the recorded voice audio.
GPS
Set GPS options.
GPS Set
GPS Select
Selects either the internal or an external GPS receiver that the
transceiver receives its position data from.
Manual Position
Manually enter your current position.
GPS Out (To DATA jack)
Turns the output of GPS information from the internal GPS
receiver to the [DATA] jack ON or OFF.
GPS TX Mode
Set the GPS TX mode.
OFF
Turns OFF the GPS TX function.
D-PRS (DV-A)
Set D-PRS options.
Unproto Address
Enters an unproto address, or keeps the default.
TX Format
Position
Symbol
Selects a D-PRS Symbol to transmit.
SSID
Selects the APRS ® call sign SSID.
Comment
Enters a comment to transmit.
Time Stamp
Selects the format to transmit the current UTC time as a
time stamp.
Altitude
Turns the altitude transmit option ON or OFF.
Data Extension
Selects whether or not to transmit the course/speed,
power/height/gain/directivity data.
Power
Selects a base station's TX power level to transmit.
Height
Selects a base station's height to transmit.
Gain
Selects a base station's antenna gain to transmit.
Directivity
Selects a base station's antenna directivity to transmit.
4
MENU SCREEN
(GPS > GPS TX Mode)
*A microSD card is required.
BASIC MANUAL
4
30