Assembly and installation guidelines
Assembly standard bus
2.5 Assembly standard bus
General
Profile rail
14
CAUTION!
–
The power supplies must be released before installation and repair
tasks, i.e. before handling with the power supply or with the cabling
you must disconnect current/voltage (pull plug, at fixed connection
switch off the concerning fuse)!
–
Installation and modifications only by properly trained personnel!
The single modules are directly installed on a profile rail and connected via the backplane
bus connector. Before installing the modules you have to clip the backplane bus con-
nector to the module from the backside. The backplane bus connector is delivered
together with the peripheral modules.
Order number
A
390-1AB60
160
390-1AE80
482
390-1AF30
530
390-1AJ30
830
390-9BC00*
2000
*) Unit pack: 10 pieces
Measures in mm
B
140
466
500
800
Drillings only left
HB140 | SM-DIO | | en | Rev. 16-43
VIPA System 300S
C
10
8.3
15
15
15