Assembly and installation guidelines
Cabling
2.6 Cabling
16
9.
Click the CPU downwards and bolt it like shown.
10.
Repeat this procedure with the peripheral modules, by clicking a backplane bus
connector, stick the module right from the modules you've already fixed, click it
downwards and connect it with the backplane bus connector of the last module and
bolt it.
CAUTION!
–
The power supplies must be released before installation and repair
tasks, i.e. before handling with the power supply or with the cabling
you must disconnect current/voltage (pull plug, at fixed connection
switch off the concerning fuse)!
–
Installation and modifications only by properly trained personnel!
VIPA System 300S
HB140 | SM-DIO | | en | Rev. 16-43