Table of Contents
Advertisement
VIPA System 300S
1.3 Safety information
Applications conforming
with specifications
Documentation
Disposal
HB140 | SM-DIO | | en | Rev. 16-43
The system is constructed and produced for:
n
communication and process control
n
general control and automation tasks
n
industrial applications
n
operation within the environmental conditions specified in the technical data
n
installation into a cubicle
DANGER!
This device is not certified for applications in
–
in explosive environments (EX-zone)
The manual must be available to all personnel in the
n
project design department
n
installation department
n
commissioning
n
operation
CAUTION!
The following conditions must be met before using or commis-
sioning the components described in this manual:
–
Hardware modifications to the process control system should only be
carried out when the system has been disconnected from power!
–
Installation and hardware modifications only by properly trained per-
sonnel.
–
The national rules and regulations of the respective country must be
satisfied (installation, safety, EMC ...)
National rules and regulations apply to the disposal of the unit!
Basics
Safety information
7
Advertisement
Table of Contents
