Assembly Speed-Bus - YASKAWA VIPA 300S Manual

Chapter 1 Assembly and installation guidelines

Assembly SPEED-Bus

For the deployment of SPEED-Bus modules, a pre-manufactured SPEED-
Pre-manufactured
Bus rail is required. This is available mounted on a profile rail with 2, 6 or
SPEED-Bus
10 extension plug-in locations.
profile rail
Installation of the
profile rail
65mm
CPU
SLOT2 SLOT1
DCDC
40mm
Profile rail
G
1-4
All manuals and user guides at all-guides.com
SLOT6 SLOT5 SLOT4
• Bolt the profile rail with the background (screw
size: M6), so that you still have minimum 65mm
space above and 40mm below the profile rail.
• Please look for a low-impedance connection
between profile rail and background
• Connect the profile rail with the protected earth
conductor.
The minimum cross-section of the cable to the
protected earth conductor has to be 10mm
CPU
SLOT2 SLOT1
DCDC
Order number
VIPA 390-1AB60
VIPA 390-1AE80
VIPA 390-1AF30
VIPA 390-1AJ30
VIPA 390-9BC00*
VIPA 391-1AF10
VIPA 391-1AF30
VIPA 391-1AF50
VIPA 391-1AF80
* Unit pack 10 pieces
Manual VIPA System 300S SPEED7
CPU
SLOT3 SLOT2 SLOT1
DCDC
SPEED-
Bus Slot
- 160mm
- 482mm
- 530mm
- 830mm
- 2000mm
2 530mm
6 530mm
10 530mm
16 830mm
HB140E - PS - RE_307-1FB70 - Rev. 13/43
2
.
A B C
140mm 10mm
466mm 8,3mm
500mm 15mm
800mm 15mm
- 15mm
500mm 15mm
500mm 15mm
500mm 15mm
800mm 15mm