YASKAWA VIPA System 300S Manual page 107

VIPA System 300S
Structure
HB140 | SM-DIO | | en | Rev. 16-43
n Useable for switches, approximate switches, magnetic valve
n Activity monitoring of the channels via LED
1 LEDs
2 flap with labeling strip
3 contact bar
4 flap opened with inner label
CAUTION!
Please regard that the voltage applied to an output channel must be £ the
voltage supply applied to L+. Due to the parallel connection of in- and
output channel per group, a set output channel may be supplied via an
applied input signal. Thus, a set output remains active even at power-off
of the voltage supply with the applied input signal. Non-observance may
cause module demolition.
Digital Modules FAST - SPEED-Bus
323-1BH70 - DIO 16xDC 24V 0.5A
107