YASKAWA VIPA System 300S Manual page 83

VIPA System 300S
Order no.
Technical data digital outputs
Number of outputs
Cable length, shielded
Cable length, unshielded
Rated load voltage
Reverse polarity protection of rated load voltage
Current consumption from load voltage L+ (without load)
Output current at signal "1", rated value
Output delay of "0" to "1"
Output delay of "1" to "0"
Minimum load current
Lamp load
Parallel switching of outputs for redundant control of a load possible (only outputs group)
Parallel switching of outputs for increased power
Actuation of digital input
Switching frequency with resistive load
Switching frequency with inductive load
Switching frequency on lamp load
Internal limitation of inductive shut-off voltage
Short-circuit protection of output
Trigger level
Number of operating cycle of relay outputs
Switching capacity of contacts
Output data size
Status information, alarms, diagnostics
Status display
Interrupts
Process alarm
Diagnostic interrupt
Diagnostic functions
Diagnostics information read-out
Supply voltage display
Group error display
Channel error display
Isolation
Between channels
HB140 | SM-DIO | | en | Rev. 16-43
323-1BL00 - DI 16xDC 24V, DO 16xDC 24V 1A > Technical data
323-1BL00
16
1000 m
600 m
DC 24 V
ü
30 mA
1 A
150 µs
100 µs
-
5 W
not possible
ü
max. 1000 Hz
max. 0.5 Hz
max. 10 Hz
L+ (-52 V)
yes, electronic
1.5 A
-
-
2 Byte
green LED per channel
no
no
no
no
none
green LED per group
red SF LED
none
ü
Digital Input/Output Modules
83