Assembly Standard Bus - YASKAWA VIPA System 300S Manual

Chapter 1 Assembly and installation guidelines

Assembly standard bus

General
Profile rail
Bus connector
1-4
The single modules are directly installed on a profile rail and connected via
the backplane bus connector. Before installing the modules you have to clip
the backplane bus connector to the module from the backside.
The backplane bus connector is delivered together with the peripheral
modules.
Order number
VIPA 390-1AB60
VIPA 390-1AE80
VIPA 390-1AF30
VIPA 390-1AJ30
VIPA 390-9BC00*
* Unit pack: 10 pieces
Measures in mm
32.5
M6
57.2
C
For the communication between the modules the System 300S uses a
backplane bus connector. Backplane bus connectors are included in the
delivering of the peripheral modules and are clipped at the module from the
backside before installing it to the profile rail.
A B
160 140
482 466
530 500
830 800
2000 Drillings only left
A
B
HB140E - IM - RE_353-1DP01 - Rev. 14/47
Manual VIPA System 300S
C
10
8.3
15
15
15
10
122
7
15