Table of Contents
Advertisement
VIPA System 300S
5
Digital Input/Output Modules
5.1 323-1BH00 - DIO 16xDC 24V 1A
Properties
Structure
HB140 | SM-DIO | | en | Rev. 16-43
The module is a combined module. It has 16 channels that can be used either as inputs
or outputs. Every channel supports a diagnostic function, i.e. as soon as an output is
active, the according input is set. If there is a short circuit at the load, the according input
is reset and the error may be recognized by analyzing the input.
n
16 channels, isolated to the backplane bus (as input or output)
n
Diagnostic function
Nominal input voltage DC 24V / supply voltage DC 24V
n
n
Output current 1A
n
LED for error message at overload, overheat or short circuit
n
Activity monitoring of the channels via LED
1
LEDs
2
flap with labeling strip
3
contact bar
4
flap opened with inner label
CAUTION!
Please regard that the voltage applied to an output channel must be £ the
voltage supply applied to L+. Due to the parallel connection of in- and
output channel per group, a set output channel may be supplied via an
applied input signal. Thus, a set output remains active even at power-off
of the voltage supply with the applied input signal. Non-observance may
cause module demolition.
Digital Input/Output Modules
323-1BH00 - DIO 16xDC 24V 1A
71
Advertisement
Table of Contents
