Connecting And Disconnecting The Motor Handpiece - DENTSPLY X-Smart Plus User Manual

2. Charge the battery before the first use (see chapter 6.5.5. Charging the Battery):
a. Connect the AC adapter to the mains.
b. Securely insert the connector of the AC adapter in the jack connector (A – see Fig. 4) on
the left side of the device.
c. Completely charge the battery prior to first use.
CAUTION
To disconnect the cables, always hold at the central part of the connector and pull out. Do not
pull the cable.

6.5.2. Connecting and Disconnecting the Motor Handpiece

Connecting
Align the  mark of the cord plug with the
left side of the device
Disconnecting
Hold the plug ring and pull it out. Do not twist in any direction.
FISDR-JAP / F1902124.EN / 07 / 2011 – updated 10/2016
A
and insert the plug until it locks.
Fig. 4 Power and Motor handpiece connectors
B
▲mark of the unit connector (B – see Fig. 4) at the
- 17 / 47 -