Program - Individual Continuous Rotary Program - DENTSPLY X-Smart Plus User Manual

13.

Program - Individual Continuous Rotary Program

For your individual settings of torque and speed values, please write file sizes and the
corresponding values in the following table (for details see chapter 6.7.3):
File Position
01
02
Program default settings:
File Position
01
02
To restore default parameters, see chapter 6.8. Factory Default Parameters.
FISDR-JAP / F1902124.EN / 07 / 2011 – updated 10/2016
File type
Ncm
2.0
4.0
Ncm
Rpm
250
250
Rpm
- 42 / 47 -