Prophy-Jet; System Controls; Handpiece - DENTSPLY Cavitron PROPHY-JET Directions For Use Manual

Section 6: Cavitron
Prophylaxis System Description

6.1 System Controls

Top Grooves
Provide a convenient, temporary place-
ment for the handpiece during treatment
procedures. Always place handpiece in
holder when not being used.
Powder Adjustment
Turn knob to select powder
level for operation: clockwise
increases powder level,
counter clockwise decreases
powder level.
AC Power Indicator Light
Lighted when System is
switched ON.
Power Control
ON/OFF switch located at the left
front underside of the System.
Lavage Flow Adjustment
Turn knob to select Lavage Flow level during System operation.
Clockwise increases flow at insert tip, counter clockwise decreases flow.

6.2 Handpiece

The handpiece accepts the JET air polishing insert nozzle.
Air Polishing Powder Delivery Port
Insert Port
ENGLISH • 6
™

PROPHY-JET

Water Filter
Removable cap for filter
maintenance.
Powder Flow Window
®
Air Polishing
Powder Fill Cap
Removable cap for filling and
emptying the powder chamber.
Air Polishing
The two-position Foot Control provides the ca-
pability to rinse in the first position and air polish
in the second position. When lighted , indicates
foot control is fully depressed and system is in
the air polishing mode.
Handpiece
Handpiece Holder
Securely holds the System's
Handpiece when system is
not being used.
Handpiece
Holds the Cavitron™ JET insert
nozzle.
Cable