Preparation; Installation; Connecting The Ac Adapter - DENTSPLY X-Smart Plus User Manual

6.4.

Preparation

1. Carefully remove the device and the accessories from their packaging and place them on a
flat surface.
2. Check that all the components listed in the STANDARD COMPONENTS chapter (see
chapter 6.1) are present.
3. Remove the protective plastic film from the operation panel.
WARNING
Should any liquid exit the device, interrupt the installation immediately and send the machine
to your distributor.
6.5.

Installation

6.5.1. Connecting the AC adapter

1. Select the plug adapter that matches your electric power outlet for the power supply.
Place the required plug adapter onto the two contacts on the power supply and push it toward
the locking button (B) until it snaps into place. You must press the locking button (B) to change
the adapter (see Fig. 3).
FISDR-JAP / F1902124.EN / 07 / 2011 – updated 10/2016
Fig. 3 Plug adapters for power supply
- 16 / 47 -