Scanning Long Page Documents - Fujitsu SP-1130Ne Operator's Manual

Scanning Long Page Documents

Documents with a length up to 3,048 mm (120 in.) can be scanned by long page scanning.
Depending on the resolution setting or the image scanning application, the document sizes that can be scanned
may differ.
For details, refer to the manual or help for the image scanning application, and the help for the scanner driver.
1
Pull out the chute extensions all the way.
For details, refer to
2
Lift the stacker and stacker extension towards you.
For details, refer to
3
Load a document in the ADF paper chute (feeder).
For details, refer to
ATTENTION
Long page documents should be loaded one sheet at a time in the ADF paper chute (feeder).
4
In the scanner driver, configure the scan settings to scan the paper size of the long page.
For details, refer to the help for the scanner driver.
For some image scanning applications, the setup window for the scanner driver may not appear.
5
Scan the document with the image scanning application.
For details, refer to the manual for your image scanning application.
ATTENTION
When scanning a long page document, support the document with your hand so that it does not fall off or is not
fed again.
For details, refer to How to Load Documents (page
Setting Up the ADF Paper Chute (Feeder) (page
Setting Up the Stacker (page
How to Load Documents (page
47).
31).
34).
47).
63
Various Ways to Scan