Images Are Distorted Or Not Clear - Fujitsu fi-6110 Operator's Manual

Chapter 8 Troubleshooting

Images are distorted or not clear.

Are the glasses and rollers inside the ADF clean?
Yes
Is the ADF being pushed down during scanning? Is there a
heavy object on top of the ADF?
No
Is anything causing the scanner to vibrate during
scanning?
No
Is the scanner placed on a flat, level surface? Are the
rubber pads attached on the bottom of the scanner?
Yes
Clean the glasses and rollers inside the ADF.
For details, refer to "Chapter 6 Daily Care" (page
No
Do not push down the top the ADF, or place any heavy objects on the ADF during
scanning.
Yes
Do not allow the scanner to vibrate during scanning.
Yes
Either place the scanner on a flat and level surface, or attach the rubber pads on
the bottom of the scanner.
No
If the problem persists, check the items in
Service Provider" (page 121)
an authorized FUJITSU scanner service provider.
85).
"8.4 Before You Contact the Scanner
first, then contact your FUJITSU scanner dealer or
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
110