How To Use The Control Panel - Brother HL-1850 Service Manual

5.4

How to Use the Control Panel

The followings are the basic steps when operating the switches; Menu, +, –, Set, and Back.
•
If no control panel operations are performed for 30 seconds, the LCD automatically
returns to READY.
•
When pressing the Set switch to select a setting, an asterisk briefly appears at the end of
display. After that, the display returns to the previous menu level.
•
After changing the status or number, pressing the Back switch before pressing the Set
switch will cause the display to return to the previous menu with the original setting
unchanged.
•
Numbers can be input by scrolling through the available range (000 to 999) or by setting
digits one at a time. When setting digits one at a time, the blinking digit is the changeable
digit.
•
An example for operation: When turning the ‘MP FIRST’ setting on
Choose this setting to load paper from the multi-purpose tray first.
READY
INFORMATION
PAPER
SOURCE
MP FIRST
=OFF
=ON
=ON
Press the + switch.
Press the + or – switch to scroll forward or backward
through the Menu selections.
Press the Set switch.
Press the Set switch to enter the next level of the selected menu.
Press the Set switch to proceed to the next menu level.
Press the + switch.
Press the Set switch.
Press the + switch.
Press the Set switch.
An asterisk briefly appears at the end of the display.
The default setting is indicated by an “
2-29
HL-1850/1870N SERVICE MANUAL
".