Brother HL-1850 Service Manual page 40

Hide thumbs Also See for HL-1850:
Table of Contents

Advertisement

For network users
Connect the printer to the Macintosh & install the BR-Script PPD file
(1) Double click the BR-Script PPD Installer icon and then follow the instructions on the
screen.
(2) Turn the printer power switch off.
(3) Connect the cable to the printer, and then connect it to a free port on the hub.
(4) Turn the printer power switch on.
(5) Open the Chooser from the Apple Menu on the Macintosh.
(6) Click the LaserWriter8 * icon (If you need to change the network zone, select which zone
you want to use from the AppleTalk
NOTE:
In the Chooser the name BRN_xxxxxx_P1_AT is appeared, where “xxxxxx” is the last six
digits of the Ethernet address. See Chapter 7 of the Network User’s Guide for more
information.
(7) Click on the appropriate printer server and close the Chooser. The setup is now complete.
* If the Apple LaserWriter8 driver is not already installed on your system, you can download it
from http://www.apple.com.
®
zones list).
2-11
HL-1850/1870N SERVICE MANUAL

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hl-1870n

Table of Contents