Rear Cover R & L / Side Cover R & L - Brother HL-1850 Service Manual

3.8 Rear Cover R & L / Side Cover R & L
(1) Remove the two shoulder screws to remove the rear cover R and rear cover L from the
printer.
(2) Remove the three shoulder screws at the side and the back of the side cover R.
(3) Hold slightly up the back side of the side cover R while releasing the hook and remove the
side cover R from the printer while pulling outward, taking care not to break the cover.
(4) Remove the shoulder screw to remove the side cover L from the printer by releasing the
hook at the bottom of the cover.
!
CAUTION:
Use caution not to bend the hooks of the interface when handling the side cover R.
Shoulder screws
Rear cover R
Shoulder screws
Fig. 4-38
Side cover L
4-23
CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
Printer
Rear cover L
Side cover R
Shoulder screw
(hook)