(3) Place paper in the multi-purpose tray so it
touches the back of the tray and remains below
the limit mark.
NOTE:
Note the following when placing paper on the multi-purpose tray:
•
If the paper to be printed on weighs more than 135 g/m
tray.
•
Insert the leading edge of the paper first and push it gently into the tray.
•
If pre-printed paper is used in the multi-purpose tray, the paper should be inserted top
edge first with the printed side face up.
(4) Press and slide the paper width adjuster to fit the
paper.
(5) Use the face down output tray for printing on
transparencies.
(6) Change the settings in the printer driver properties tab.
2
(36 lbs), use the face up output
2-13
HL-1850/1870N SERVICE MANUAL
Fig. 2-15
Fig. 2-16
Fig. 2-17