Download Print this page

Brother HL-1870n Driver Installation Manual

Driver setup guide for windows - english
Hide thumbs

Advertisement

Laser Printer HL-1850 and HL-1870N
Driver Installation Guide
®
Windows
For non-Network Users
Follow the instructions in this guide for your interface cable.
Some illustrations are based on the HL-1870N.
Steps 1 to 4 Follow these steps in the Quick Setup Guide first.
USB
For
Interface Cable Users Only
Step 5 Install the Driver & Connect the Printer to Your PC
Note: When the "Add New Hardware Wizard" appears on
your PC, click the Cancel button.
Note: Make sure the USB interface cable is NOT connected
to the printer, and then begin installing the driver. If you have
already connected the cable, remove it.
2
3
Select the USB interface cable.
O
I
OFF ON
5
When this screen appears, make sure the printer power switch is on.
Connect the USB interface cable to your PC, and then connect it to the printer.
Click the Next button.
Note: Setting Your Printer as the Default Printer
1
2
Click Start, Setting and Printers.
©2002 Brother Industries, Ltd. ©1998-2002 TROY XCD Inc. ©1983-1998 PACIFIC SOFTWORKS INC. ALL RIGHTS RESERVED
Windows and Windows NT are registered trademarks of Microsoft Corporation in the U.S. and other countries. HP, HP/UX, JetDirect and JetAdmin are trademarks of Hewllet-Packard Company. UNIX is a trademark
of UNIX Systems Laboratories. Adobe PostScript and PostScript3 are trademarks of Adobe Systems Incorporated. Netware is a trademark of Novell, Inc.
All other brand and product names are trademarks or registereted trademarks of their respective holders.
1
Click "Connect the interface cable &
Install the driver/utility."
4
Click the Install button.
Follow the instructions on the
screen.
6
Click the Finish button.
The setup is now complete.
*
1 Please follow the steps below when the printer is not set as the default printer.
(For Windows
®
2000/XP Users Only)
3
Select the Brother HL-1850 or HL-1870N
From the File menu, select
icon.
Set as Default printer.
Parallel
For
Step 5 Connect the Printer to Your PC & Install the Printer Driver
1
Click "Connect the interface cable & Install the
driver/utility."
LJ5996001 Printed in China
4
Connect the parallel interface cable to your PC, and
then connect it to the printer.
6
Click the Install button.
Control Panel
*
1
Data
Back
Reprint
Set
Job cancel
Go
For more information, see "CONTROL
PANEL" in Chapter 3 of the User's Guide on
the supplied CD-ROM.
Interface Cable Users Only
2
Select the Parallel interface cable.
O
I
OFF ON
5
Turn on the printer power switch.
7
Follow the instructions on the screen.
Data LED : Orange
On
Data remains in the printer buffer.
Blinking
Receiving or processing data.
Off
No remaining data.
Buttons
Go
Exit from the control panel menu, Reprint settings or clear error messages.
Pause / Continue printing.
Job Cancel
Stop and cancel the printer operation in progress.
Reprint
Select the Reprint menu.
Move forward through menus.
Move backward through menus.
Menu
Set
Select the control panel menu.
Set the selected menus and settings.
Back
Go back one level in the menu structure.
Language Setting (Default is English)
+
1. Select the SETUP mode by pressing the
button, and then press the Set button.
2. Check that the LANGUAGE message appears, and then press the Set button.
+
-
3. Choose your language by pressing the
or
button, and then press the Set button. An asterisk mark (
appears at the end of the display.
(You can return to the READY status by pressing the Go button.)
Note
Please enhance the RAMDISK size when you want to use the Reprint functions without the optional HDD
or CompactFlash.
See "RAM expansion" in Chapter 4 of the User's Guide on the supplied CD-ROM.
O
I
OFF ON
3
Turn off the printer power switch.
Note: If the "Add New Hardware
Wizard" appears on your PC, click the
Cancel button.
8
Click the Finish button.
The setup is now complete.
)
*

Advertisement

loading

  Related Manuals for Brother HL-1870n

  Summary of Contents for Brother HL-1870n

  • Page 1 Windows For non-Network Users Follow the instructions in this guide for your interface cable. Some illustrations are based on the HL-1870N. OFF ON Steps 1 to 4 Follow these steps in the Quick Setup Guide first. Click "Connect the interface cable & Install the Select the Parallel interface cable.
  • Page 2: For Network Users

    Turn on the printer power switch. Click the Install button. After your PC has restarted, click Select the Brother HL-1850 or Brother HL-1870N icon. Click the Configure Port... Select "LPR" on protocol, and then click the OK button. the printer, and then connect it to a free Start, Settings and Printers.

This manual is also suitable for:

Hl 1850 - b/w laser printerHl-1850