Storage Of Liquids; Control Panel - Brother GTXpro BULK DTF R2R Manual

Please check the temperature and air humidity in the menu of the printer:

Menu
Temperature/Humidity Info
Confirm network setting
Language
Version
If temperature is too cold: The printer will switch automatically to "Low-Temp Mode" and reduce the
speed. Raise the temperature of the printer's environment.
If temperature is too high: Please turn down the temperature of the surrounding area of the printer.
If humidity is too low:
If humidity is too high: Please try to lower the humidity of the surrounding area of the printer.
Please always keep the temperature and humidity within the required ranges, otherwise the GTXpro
might get damaged.
STORAGE OF THE LIQUIDS
1.4
The liquids should be stored at a temperature between minimum 0°C and maximum 40°C.
MAX
40°
M I N
EXPLANATION OF THE CONTROL PANEL
1.5
The printer will perform auto-cleaning after every print if the humidity is lower
than 35%.
Please install a humidifier in your workspace.
Please turn over the white ink refill tank every week.

Do not use inks or liquids with a temperature below

18° C or above 30° C .
0 °

Temperature/Humidity Info
Temperature
Humidity
Press OK to return
The display shows the current loaded print file with
the choosen print format, the approximate ink
consumption for it and the number of prints.
In the bottom left corner the ink level is shown.
The light blue rectangles show the selection of print
direction and the resolution of the print.
Warnings are displayed in yellow in the bottom right
corner. By pressing , the display changes to the
warning display on which the warning and the nee-
ded operations are indicated.
[ 21°C ]
[ 55 % ]
3 / 26