Disassembly Procedure; Ac Cord; Drum Unit - Brother HL-1850 Service Manual

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
3.

DISASSEMBLY PROCEDURE

NOTE:
Refer to the
printer parts.
3.1

AC Cord

(1) Disconnect the AC cord from the printer AC inlet.
3.2

Drum Unit

(1) Press the cover release button, and open the process unit cover ASSY and remove the
drum unit from the printer.
subsection “3.27 Harness Winding Form” in this Chapter
Printer
AC inlet
Process unit cover ASSY
Fig. 4-1
Drum unit
Fig. 4-2
4-4
when re-assembling
AC cord
Cover release button