Manual Feed - Brother HL-1850 Service Manual

CHAPTER 2 INSTALLATION AND BASIC OPERATION
(3) Open the Property tab in the printer driver. Select the duplex printing mode in the Paper
tab, and then click the OK button. The printer will print on both sides of the paper
automatically.
4.5

Manual Feed

If paper is placed in the multi-purpose tray when the setting MANUAL FEED = ON has been
set in PAPER mode using the control panel, the printer will load paper only form the multi-
purpose tray.
NOTE:
Note the following when feeding paper manually:
•
If the application software supports a manual feed selection in the print menu, it can be
selected in that software. The software command setting overrides the control panel’s
setting. It will not be necessary to set MANUAL FEED in PAPER mode.
•
If pre-printed paper is used in the multi-purpose tray, the paper should be inserted top
edge first with the pre-printed side face up.
4.6 Printing side of duplex printing
Since the standard delivery tray is a face down tray, when duplex printing is carried out, an
even-numbered paper is printed first, then the odd numbered page, so that the page order in
the output tray is correct.
If single side printing is done in normal mode, paper is drawn from an input tray, and it naturally
prints and discharges a face down page.
If single side printing of 1-page of data is done in duplex mode, printing is done by feeding
paper from an input tray, passing it through the duplex unit and then printing the first side.
2-20