Brother HL-1850 Service Manual page 129

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
(4) Remove the frap 2 spring from the flap 2 and then remove the flap 2 from the DX outer
chute.
Frap 2 spring
(5) Remove rear cover from the printer by releasing the hooks at the right and left sides of the
printer and then remove the DX rear chute from the rear cover C.
2
1
Flap 2
(hook)
Fig. 4-36
DX rear chute
Rear cover C
Fig. 4-37
4-22
DX outer chute