Brother HL-1850 Service Manual page 126

(7) Remove the bind B M3x8 Taptite screw from the guide plate stopper and remove the left
guide spring 2.
(8) Remove the side regist guide from the DX feed ASSY by releasing the hook at the bottom
side of the ASSY using a pair of long nose pliers.
NOTE:
“ERROR 41” may occur if the left guide springs are not fitted correctly. See
‘Service Calls’ in CHAPTER 6
DX feed ASSY
(9) Remove the left guide plate from the DX feed ASSY while pushing down the DX paper
actuator forward and then release the Drive gear 14 to remove the DX feed roller ASSY.
DX feed roller ASSY
for more information on “ERROR 41”.
Taptite, bind B M3x8
Guide plate stopper
DX feed ASSY (Back side)
Left guide springs 2
2
Fig. 4-30
Drive gear 14
Left guide plate
4-19
CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
subsection 2.2
(hook)
1
Side regist guide
DX paper actuator
DX feed ASSY