Honeywell VISTA-128BP Installation And Setup Manual page 81

FIELD TITLE and DATA ENTRIES
Pager 5 Partition Enable
2*66
0 = disable
1 = enable
Pager 5 Trigger Event Enables
2*67
0 = disable
1 = enable
Pager 6 Phone Number
2*68
Enter 0-9; #11 for *, #12 for #, #13 for a 2-
second pause.
Pager 6 ID Number
2*69
Enter 0-9
Pager 6 Format
2*70
0 = numeric
1 = ID
2 = alphanumeric
Pager 6 Delay 1
2*71
000-060 seconds.
Pager 6 Delay 2
2*72
000-060 seconds.
Pager 6 Partition Enable
2*73
0 = disable
1 = enable
Pager 6 Trigger Event Enables
2*74
0 = disable
1 = enable
Pager 7 Phone Number
2*75
Enter 0-9; #11 for *, #12 for #, #13 for a 2-
second pause.
Pager 7 ID Number
2*76
Enter 0-9
Pager 7 Format
2*77
0 = numeric
1 = ID
2 = alphanumeric
Pager 7 Delay 1
2*78
000-060 seconds.
Pager 7 Delay 2
2*79
000-060 seconds.
Pager 7 Partition Enable
2*80
0 = disable
1 = enable
WWW.DIYALARMFORUM.COM
EXPLANATION
This field has eight entries, one for each partition. If enabled, the system sends
messages to Pager 5 for the partition(s).
This field has five entries as follows: Alarm, Trouble, Bypass, Open/Close,
System.
If enabled, the system sends a signal to the pager.
Enter the paging service phone number for Pager 6. Enter up to 17 digits. Do
not fill unused spaces.
Enter the Pager ID number for Pager 6. Enter up to 10 digits.
Enter the pager format for Pager 6.
This delay occurs after the phone number is dialed and before the pager ID is
sent, giving the pager system time to answer the phone call.
NOTE: Program only if using numeric format.
This delay occurs after the pager ID is sent and before the event information is
sent.
NOTE: Program only if using numeric format.
This field has eight entries, one for each partition. If enabled, the system sends
messages to Pager 6 for the partition(s).
This field has five entries as follows: Alarm, Trouble, Bypass, Open/Close,
System.
If enabled, the system sends a signal to the pager.
Enter the paging service phone number for Pager 7. Enter up to 17 digits. Do
not fill unused spaces.
Enter the Pager ID number for Pager 7. Enter up to 10 digits.
Enter the pager format for Pager 7.
This delay occurs after the phone number is dialed and before the pager ID is
sent, giving the pager system time to answer the phone call.
NOTE: Program only if using numeric format.
This delay occurs after the pager ID is sent and before the event information is
sent.
NOTE: Program only if using numeric format.
This field has eight entries, one for each partition. If enabled, the system sends
messages to Pager 7 for the partition(s).
WWW.DIYALARMFORUM.COM
Section 5 – Data Field Descriptions
5-17