(Appendix A) Mea/Motomesh - Sony Camera Quick Network Configuration Check Guide; Testing The Functionality Of A Mea Enabled Camera In An Infrastructure Environment; Figure A-7 Firmware Successfully Upgraded Screen; Procedure A-2 Testing Infrastructure Functionality Of Mea Enabled Sony Camera - Motorola MOTOMESH 1.2 Setup And Configuration Manual

Appendix A: Reference Information
Select the Finish button to complete the upgrade task.
8
Figure A-7
End of Procedure.
9
(Appendix A) MEA/MOTOMESH – Sony Camera Quick
Network Configuration Check Guide
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Testing the Functionality of a MEA Enabled Camera in an
Infrastructure Environment
This portion of the MEA/MOTOMESH – Sony Camera Quick Check Guide deals with testing
functionality of a Mesh Enabled Sony Camera in a network environment. This quick check procedure
requires wireless network connectivity to allow the WMC7300 card to associate with an IAP and
receive an IP address via the DHCP server.
Procedure A-2 Testing Infrastructure Functionality of MEA Enabled Sony Camera
1 Enter a WMC7300 MAC address in the MeshManager database as described in the MeshManager
User's Guide. This will allow the device to associate with an IAP and allow it to be managed as a
network element.
Insert a WMC7300 card into the Sony camera's PCMCIA slot. Power up the camera and allow it to go
2
through its self-check routine.
From the Device Tree in MeshManager, right click on the DUT (device under test) and verify IP
3
addresses have been issued for the WMC7300 and the host (camera).
6881011Y68-B October 2006
Firmware Successfully Upgraded Screen
.
.
A-4