Table of Contents
Advertisement
Chapter 2: Configuration
Select the Statically Provisioned radio button in the Addressing scheme selection field.
2
Select the Off radio button in the DNS auto acquisition selection field
3
Set the Host Fixed IP address to an IP address in the same subnet ( 10.3.X.X for 2.4 or 10.4.X.X for 4.9 )
4
and outside the DCHP lease range ( default: 10.3.0.100 to 10.3.254.254 for 2.4 or 10.4.0.100 to
10.4.254.254 for 4.9 ) The static range is default 10.3.0.2-99 or 10.4.0.2-99.
Set the Subnet to 255.255.0.0 and the Default gateway to 10.3.0.1 for 2.4 or 10.4.0.1 for 4.9
5
Select the Force authorized radio button in the Authentication control field.
6
Click on the OK button at the bottom of the screen.
7
End of Procedure.
8
Determining Camera Host IP Address
The following procedure describes how to obtain the Camera Host IP address for use with the
RealShot Manager application and where to find the Launch Web Browser feature in MeshManager.
Please note that the directions listed in the following procedure will only apply
when used with the correct version of Motorola MeshManager software.
6881011Y68-B October 2006
2-16
Advertisement
Chapters
Table of Contents
