Statically Provisioning The Camera's Host Ip Address From The Wired Side Of The Camera; Figure 2-17 Camera Web Interface Showing The Mesh Network Button; Figure 2-18 Wireless Card Web Interface; Procedure 2-5 Configuring The Camera's Host Ip Address To Dhcp - Motorola MOTOMESH 1.2 Setup And Configuration Manual

Statically Provisioning the Camera's Host IP Address from
the Wired Side of the Camera
IMPORTANT: The IP address used in the Camera's web page and in MeshManager must match.
Procedure 2-5 Configuring the Camera's Host IP Address to DHCP
After connectivity is confirmed, set the options for the Wireless Card in one of two ways:
1
1.) From the camera home webpage, select the Setting button | Network tab | Wireless tab | Mesh
Network button. Selecting this button will provide access to the Mesh wireless card web interface.
Please note that this option will ONLY work when a MEA card is installed.
IMPORTANT NOTE: If you are presented with a Login dialog, use lowercase admin for both,
username and password.
Figure 2-17
or
2.) Redirect the browser to http://192.168.0.100/en/l4/network/meshnetwork.html. (This is the wireless
card configuration web interface).
Figure 2-18
6881011Y68-B October 2006
MOTOMESH 1.2 Mesh Camera System Setup and Configuration Guide
Camera Web Interface Showing the Mesh Network button
Wireless Card Web Interface
2-15