Figure 2-16 Selecting The Network Dhcp Option - Motorola MOTOMESH 1.2 Setup And Configuration Manual

Mesh camera system

Hide thumbs Also See for MOTOMESH 1.2:

Table of Contents

Chapter 2: Configuration

From within the IP Addressing tab, ensure that under the HOST heading, the Host Network DHCP

Enabled option is set to FALSE.

Set the Host Fixed IP address to an IP address in the same subnet (10.3.X.X for 2.4 or 10.4.X.X for

4.9) and outside the DCHP lease range (default: 10.3.0.100 to 10.3.254.254 for 2.4 or 10.4.0.100 to

10.4.254.254 for 4.9) The static range default is 10.3.0.2-99 or 10.4.0.2-99.

Set Host DNS to 172.31.0.20

Set Host Router/Gateway to 10.3.0.1 for 2.4 or 10.4.0.1 for 4.9

Set Host Subnet Mask to 255.255.0.0

Select the Save button.

Figure 2-16

End of Procedure.

6881011Y68-B October 2006

Selecting the Network DHCP Option

2-14

Table of Contents

Chapters

Table of Contents