Correct Motorola Wireless Modem Card Insertion Technique; Part Ii - Indoor Assembly Tasks (On The Bench); Figure 1-6 Correct And Incorrect Method Of Wmc Insertion Into Camera - Motorola MOTOMESH 1.2 Setup And Configuration Manual

Chapter 1: Overview

Correct Motorola Wireless Modem Card Insertion Technique

To properly insert a WMC7300 Card into a Sony RX5500N/W-MT camera that
is resting on a hard surface (as shown in graphic "A" below); hold the WMC
card with the color label facing DOWN (the MAC Address label will be facing
UP). Inserting the card incorrectly into the camera can damage the pins
inside the camera.
Figure 1-6
Correct
Insertion
Method –
MAC
Address
Label
Facing UP.

Part II - Indoor Assembly Tasks (On the Bench)

1. Install the camera in the outdoor dome housing with the power/alarm plugs hanging out the back.
(Do Not Use the Indoor and Outdoor Housing manual provided in Dome box for STEP B ONLY.)
A.) Unscrew plate in the bottom of the outdoor housing.
B.) Line up and attach the camera onto the mounting plate as per the instructions provided
6881011Y68-B October 2006
Correct and Incorrect Method of WMC Insertion into Camera
in this section. DO NOT FOLLOW the directions in the Indoor and Outdoor Housing
manual.
NOTE: The camera is mounted correctly on the mounting plate when the fan is
positioned to blow directly on the PCMCIA slot. See the figures below for the exact
camera mounting location.
Incorrect
Insertion
Method –
Color
Label
Facing Up.
A
1-8
B