Configuring The Camera's Host Ip Address To Dhcp In Motomesh Meshmanager; Procedure 2-2 Configuration Using Motomesh Meshmanager - Motorola MOTOMESH 1.2 Setup And Configuration Manual

Select the Network DHCP radio button in the Addressing scheme selection field.
12
Select the On radio button in the DNS auto acquisition selection field
13
Select the Force authorized radio button in the Authentication control field.
14
Click on the OK button at the bottom of the screen.
15
End of Procedure.
16
Configuring the Camera's Host IP Address to DHCP in
MOTOMESH MeshManager
The procedure below describes how to configure the Sony camera in the Motorola MOTOMESH
Device Manager environment.
The IP Setup Program that is referred to in the Sony RealShot Manager Guide
does not work in the Motorola MOTOMESH network environment. Please use the
IP configuration instructions provided for use with Motorola MeshManager in the
sections below.
Procedure 2-2 Configuration Using MOTOMESH MeshManager
Provision the MOTOMESH card. (Refer to the MeshManager User's Guide for details).
1
6881011Y68-B October 2006
MOTOMESH 1.2 Mesh Camera System Setup and Configuration Guide
2-7