Table of Contents
Advertisement
Installation
Required Tools and Materials
Small slotted screwdriver with 5/64" or 2 mm blade width — for connecting power when not using
l
Power over Ethernet.
No. 2 Phillips screwdriver — for attaching camera to an electrical box or wall
l
T20 Pin-In star-shaped driver
l
Camera Package Contents
Ensure the package contains the following:
Avigilon H4 HD Dome Camera
l
Mounting template sticker
l
RJ-45 grommet piercing Cap
l
4 screws and anchors for solid walls
l
Wall plate
l
Installation Steps
Complete the following sections to install the device.
Removing the Dome Cover
Remove the dome cover by loosening the screws that fix the cover to the base. Use a T20 Pin-In star-
shaped driver to loosen the screws.
Note: Be careful not to scratch or touch the dome bubble. The resulting marks or fingerprints may
affect the overall image quality. Keep the protective covers on the outside of the dome bubble
until the installation is complete.
Mounting and Aiming Video Analytics Cameras
When installing an Avigilon video analytics camera, follow the listed mounting and aiming recommendations
to maximize the camera's analytics capabilities:
Installation
8
Advertisement
Table of Contents
