Hobart 5359D Operation And Maintenance Manual page 195

I
.
OM 2012
SECTION 3. PARTS LIST
.
1. Explanation of Parts List Arrangement
The parts list is arranged so that the illustration will appear on a left-hand page
and the applicable pat-is list will appear on the opposite right-hand page. Unless
the list is unusually long, the user will be able to look at the illustration and read
the parts
list
without turning a page.
2. Symbols and Abbreviations
The following is .a list of symbols and abbreviations used in the parts list.
* - Item not illustrated
A, or AMP -ampere
AC - a ltemat ing current
AR - as required
DC - direct current
Fig.
- Figure
hd. -head
.
hex - hexagon
Hz - Hertz (cyc les-per-secad)
I.D. - ins ide diameter
IN - inch
WA - kilovolt-ampere
NtfD - microfarad .
No.
- number
NHA -
next
higher assembly
PRV - peak reverse voltage
PSI - pounds per square inch
Ref - reference (the item has been listed previously)
TM -Technical Manual
T-R - transformer-rectifier
._.
v- volt (when used as a prefix to a five-digit number, indicates
vendor code)
NOTE: An item which does not reflect an index number is an assembly which
is not illustrated in its assembledstate, or it is similar (right-hand,
left-hand, top, etc .) to an item which is illustrated.
Aug 25'85