Dell PowerEdge M420 Owner's Manual page 93

Error Code Message Information
PST0137
PST0138
PST0139
PST0140
PST0141
PST0142
PST0143
Downloaded from www.Manualslib.com
Action Remove and reapply input power. If the issue persists, see
Message Parity error.
LCD Message Parity error. Power cycle system.
Details System BIOS detected a parity error during post.
Action Remove and reapply input power. If the issue persists, see
Message SuperIO failed.
LCD Message SuperIO failure. Power cycle system.
Details System BIOS detected a failure with the SIO.
Action Remove and reapply input power. If the issue persists, see
Message Keyboard controller failed.
LCD Message Keyboard controller failed. Power cycle system.
Details System BIOS detected a failure with the Keyboard Controller.
Action Remove and reapply input power. If the issue persists, see
Message System management interrupt initialization failed.
LCD Message SMI initialization failed. Power cycle system.
Details System BIOS failed to initialize the system management interrupt.
Action Remove and reapply input power. If the issue persists, see
Message QuickPath Interconnect (QPI) fatal error.
LCD Message QuickPath Interconnect (QPI) fatal error.
Details Quick Path Interconnect failed during system POST.
Action Reboot the system. If problem persists, remove input power and re-seat processors.
Message MRC fatal error.
LCD Message Memory initialization error.
Details BIOS Memory testing failed.
Action Compare system memory installation to supported system memory configurations.
Reduce system configuration to minimum memory configuration.
Message Intel Trusted Execution Technology (TXT) fatal error.
LCD Message Intel Trusted Execution Technology (TXT) fatal error.
manuals search engine
Getting Help.
Getting Help.
Getting Help.
Getting Help.
Getting Help.
93