Dell PowerEdge M420 Owner's Manual page 92

Error Code Message Information
PST0130
PST0131
PST0132
PST0133
PST0134
PST0135
PST0136
92
Downloaded from www.Manualslib.com
Message Memory is configured, but not usable.
LCD Message Memory is configured, but not usable. Check memory devices
Details The system BIOS encountered device failures or speed configurations that resulted in
unused memory.
Action Re-seat the memory modules. If the issue persists, see
Message System BIOS shadow failed.
LCD Message System BIOS shadow failed. Check memory devices.
Details Memory errors occurred copying BIOS image into system memory.
Action Remove input power. Reduce system memory to minimum configuration and apply input
power.
Message CMOS failed.
LCD Message CMOS failed. Power cycle system.
Details System BIOS detected a failure with CMOS memory during system POST.
Action Check system event log for CMOS battery exceptions. Remove and reapply input
power. If the issue persists, see
Message DMA controller failed.
LCD Message DMA controller failed. Power cycle system.
Details System BIOS detected a failure with the DMA controller during system POST.
Action Remove and reapply input power.
Message Interrupt controller failed.
LCD Message Interrupt controller failed. Power cycle system.
Details System BIOS detected a failure with the interrupt controller during system POST.
Action Remove and reapply input power. If the issue persists, see
Message Timer refresh failed.
LCD Message Timer refresh failed. Power cycle system..
Details System BIOS detected a timer refresh failure during system POST.
Action Remove and reapply input power. If the issue persists, see
Message Programmable interval timer error.
LCD Message Programmable interval timer error. Power cycle system.
Details System BIOS detected an failure with the programmable interval timer during POST.
manuals search engine
Getting Help.
Getting Help.
Getting
Getting
Help.
Help.